D-Link DES-3350SR Reference Manual page 294

show snmp host
Restrictions
Example usage:
To display the currently configured SNMP hosts on the switch:
local>show snmp host
Command: show snmp host
SNMP Host Table
Host IP Address
---------------
10.48.76.23
10.48.74.100
Total Entries: 2
local>
create trusted_host
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To create the trusted host:
DES-3350SR Layer 3 Gigabit Switch
Only administrator-level can use this command.
SNMP Version Community Name/SNMPv3 User Name
--------------------- ------------------------------
V2c private
V3 authpriv public
Used to create the trusted host.
create trusted_host <ipaddr>
The create trusted_host command creates the trusted host. The
switch allows you to specify up to four IP addresses that are
allowed to manage the switch via in-band SNMP or TELNET
based management software. These IP addresses must be
members of the Management VLAN. If no IP addresses are
specified, then there is nothing to prevent any IP address from
accessing the switch, provided the user knows the Username and
Password.
<ipaddr> The IP address of the trusted host.
Only administrator-level users can issue this command.
46