D-Link DES-3350SR Reference Manual page 88

Example usage:
To configure bandwidth control:
local> config bandwidth_control 1-4 rx_rate no_limit
Command: config bandwidth_control 1-4 rx_rate no_limit
Success.
local>
show bandwidth_control
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display bandwidth control settings:
DES-3350SR Layer 3 Gigabit Switch
Used to display the bandwidth control configuration on the switch.
Show bandwidth_control {<portlist>}
The show bandwidth_control command displays the current
bandwidth control configuration on the switch, on a port-by-port
basis.
<portlist> Specifies a port or range of ports to be configured.
Using this command without adding a portlist entry will show the
bandwidth control for all ports in the switch stack.
None.
84