D-Link DES-3350SR Reference Manual page 333

local> show bandwidth_control
Command: show bandwidth_control
Bandwidth Control Table
Port RX Rate (Mbit/sec) TX_RATE (Mbit/sec)
---- ------------------------
1 no_limit
2 no_limit
3 no_limit
4 no_limit
5 no_limit
6 no_limit
7 no_limit
8 no_limit
9 no_limit
10 no_limit
11 no_limit
12 no_limit
13 no_limit
14 no_limit
15 no_limit
16 no_limit
17 no_limit
18 no_limit
local>
config 802.1p user_priority
Purpose
Syntax
DES-3350SR Layer 3 Gigabit Switch
----------------------
no_limit
no_limit
no_limit
no_limit
no_limit
no_limit
no_limit
no_limit
no_limit
no_limit
no_limit
no_limit
no_limit
no_limit
no_limit
no_limit
no_limit
no_limit
Used to map the 802.1p user priority tags of an incoming packet to
one of the eight hardware queues available on the switch.
config 802.1p user_priority <priority 0-7> <class_id 0-3>
85