D-Link DES-3350SR Reference Manual page 399

create access_profile
Parameters
ethernet
each packet header.
ip
frame's header.
DES-3350SR Layer 3 Gigabit Switch
Specifies that the switch will examine the layer 2 part of
vlan Specifies that the switch will examine the VLAN part of
each packet header.
source_mac <macmask>
for the source MAC address. This mask is entered in the
following hexadecimal format:
destination_mac <macmask>
mask for the destination MAC address.
802.1p Specifies that the switch will examine the 802.1p
priority value in the frame's header.
ethernet_type Specifies that the switch will examine the
Ethernet type value in each frame's header.
Specifies that the switch will examine the IP address in each
vlan Specifies a VLAN mask.
source_ip_mask <netmask>
for the source IP address.
destination_ip_mask <netmask>
mask for the destination IP address.
dscp Specifies that the switch will examine the DiffServ
Code Point (DSCP) field in each frame's header.
icmp Specifies that the switch will examine the Internet
Control Message Protocol (ICMP) field in each frame's
header.
type Specifies that the switch will examine each
frame's ICMP Type field.
code Specifies that the switch will examine each
frame's ICMP Code field.
igmp Specifies that the switch will examine each frame's
Internet Group Management Protocol (IGMP) field.
type Specifies that the switch will examine each
frame's IGMP Type field.
tcp Specifies that the switch will examine each frames
Transport Control Protocol (TCP) field.
src_port_mask <hex 0x0-0xffff>
mask for the source port.
dst_port_mask <hex 0x0-0xffff>
mask for the destination port.
151
flag_mask [ all | {urg | ack | psh | rst | syn | fin}] – Enter the
appropriate flag_mask parameter. All incoming packets have
TCP port numbers contained in them as the forwarding
Specifies a MAC address mask
Specifies a MAC address
Specifies an IP address mask
Specifies an IP address
Specifies a TCP port
Specifies a TCP port