Network Management (Snmp) Commands - D-Link DS-3550 Command Line Interface Reference Manual

The network management commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in
the following table.
The DES-3550 supports the Simple Network Management Protocol (SNMP) versions 1, 2c, and 3. You can specify which
version of the SNMP you want to use to monitor and control the switch. The three versions of SNMP vary in the level of
security provided between the management station and the network device. The following table lists the security features of the
three SNMP versions:
SNMP
Version
v1
v2c
v3
v3
v3
Command
create snmp user
delete snmp user
show snmp user
create snmp view
delete snmp view
show snmp view
create snmp
community
delete snmp
community
show snmp
community
config snmp
engineID
N M
ETWORK
Authentication Method
Community String
Community String
Username
MD5 or SHA
MD5 DES or SHA DES
Parameters
<username 32> <groupname 32> {encrypted [by_password auth
[md5 <auth_password 8-16 > | sha <auth_password 8-20 >] priv
[none | des <priv_password 8-16> ] | by_key auth [md5 <auth_key
32-32>| sha <auth_key 40-40>] priv [none | des <priv_key 32-
32> ]]}
<SNMP_name 32>
<view_name 32> <oid> view_type [included | excluded]
<view_name 32> [all | oid]
<view_name 32>
<community_string 32> view <view_name 32> [read_only |
read_write]
<community_string 32>
<community_string 32>
<snmp_engineID>
ANAGEMENT
Description
Community String is used for authentication −
NoAuthNoPriv
Community String is used for authentication −
NoAuthNoPriv
Username is used for authentication − NoAuthNoPriv
Authentication is based on the HMAC-MD5 or
HMAC-SHA algorithms − AuthNoPriv
Authentication is based on the HMAC-MD5 or
HMAC-SHA algorithms − AuthPriv.
DES 56-bit encryption is added based on the CBC-
DES (DES-56) standard
27
(SNMP) C
OMMANDS
7