D-Link DES-3350SR Reference Manual page 365

config ipif
Parameters
Restrictions
Example usage:
To configure the IP interface System:
local>config ipif System ipaddress 10.48.74.122/8
Command: config ipif System ipaddress 10.48.74.122/8
Success.
local>
show ipif
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display IP interface settings.
DES-3350SR Layer 3 Gigabit Switch
<ipif_name 12> The name for the IP interface previously created,
that is to be configured.
ipaddress <network_address>
interface to be configured. You can specify the address and mask
information using the traditional format (for example,
10.1.2.3/255.0.0.0 or in CIDR format, 10.1.2.3/8).
vlan <vlan_name 32>
the System IP interface.
state [enable | disable]
interface.
bootp Allows the selection of the BOOTP protocol for the
assignment of an IP address to the switch's System IP interface.
dhcp Allows the selection of the DHCP protocol for the
assignment of an IP address to the switch's System IP interface.
Only administrator-level users can issue this command.
Used to display the configuration of an IP interface on the switch.
show ipif <ipif_name 12>
This command will display the configuration of an IP interface on
the switch.
<ipif_name 12> The name created for the IP interface to view.
None.
117
IP address and netmask of the IP
The name of the VLAN corresponding to
Allows you to enable or disable the IP