D-Link DES-3350SR Reference Manual page 221

show ospf area
Syntax
Description
Parameters
Restrictions
Usage Example
To display an OSPF area's settings:
local>show ospf area
Command: show ospf area
Area ID
--------------
0.0.0.0
10.48.74.122
Total Entries: 2
local>
create ospf host_route
Purpose
Syntax
Description
Parameters
Restrictions
Usage Example
To configure the OSPF host route settings:
DES-3350SR Layer 3 Gigabit Switch
show ospf area {<area_id>}
This command will display the current OSPF area configuration.
<area_id> A 32-bit number in the form of an IP address
(xxx.xxx.xxx.xxx) that uniquely identifies the OSPF area in the
OSPF domain.
None.
Type Stub Import Summary LSA
------------- ------------------------------------
Normal None
Stub Enabled
Used to configure OSPF host route settings.
create ospf host_route <ipaddr> {area <area_id> | metric <value
1-65535>}
This command is used to configure the OSPF host route settings.
<ipaddr> The host's IP address.
<area_id> A 32-bit number in the form of an IP address
(xxx.xxx.xxx.xxx) that uniquely identifies the OSPF area in the
OSPF domain.
metric <value 1-65535>
be advertised.
Only administrator-level users can issue this command.
Stub
-----------
None
Enabled
A metric between 1 and 65535, which will
217
Default Cost
--------
None
1