D-Link DES-3350SR Reference Manual page 260

The basic switch commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the
following table.
Command
create account
config account
show account
delete account
show session
show switch
show serial_port
config serial_port
enable clipaging
disable clipaging
enable telnet
disable telnet
enable web
disable web
save
reboot
reset
login
logout
Each command is listed, in detail, in the following sections.
create account
Purpose
Syntax
Description
Parameters
DES-3350SR Layer 3 Gigabit Switch
Parameters
[admin | user] <username 15>
<username>
<username>
{baud_rate [9600 | 19200 | 38400 | 115200] auto_logout [never |
2_minutes | 5_minutes | 10_minutes | 15_minutes]}
<tcp_port_number 1-65535>
<tcp_port_number 1-65535>
{[config | system]}
Used to create user accounts
create [admin | user] <username 15>
The create account command is used to create user accounts that
consist of a username of 1 to 15 characters and a password of 0
to 15 characters. Up to 8 user accounts can be created.
Admin <username>
User <username>
12
B S
ASIC WITCH
4
C
OMMANDS