D-Link DES-3350SR Reference Manual page 341

config mirror port
Restrictions
Example usage:
To add the mirroring ports:
local> config mirror port 1:5 add source ports 1:1-1:5 both
Command: config mirror port 1:5 add source ports 1:1-1:5 both
Success.
local>
config mirror delete
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To delete the mirroring ports:
DES-3350SR Layer 3 Gigabit Switch
The Target port cannot be listed as a source port. Only
administrator-level users can issue this command.
Used to delete a port mirroring configuration.
config mirror port <port> delete source port <portlist> [rx | tx |
both]
This command is used to delete a previously entered port
mirroring configuration.
port <port> This specifies the Target port (the port where
mirrored packets will be sent).
delete source port – Adding this parameter will delete source ports
according to ports entered using the <portlist>.
§ <portlist>
This specifies a range of ports that will be
mirrored. That is, the range of ports in which all traffic will be
copied and sent to the Target port.
§ rx
Allows the mirroring of only packets received by
(flowing into) the port or ports in the port list.
tx Allows the mirroring of only packets sent to (flowing out of) the
port or ports in the port list.
both Mirrors all the packets received or sent by the port or ports
in the port list.
Only administrator-level users can issue this command.
93