D-Link DES-3350SR Reference Manual page 21

local>show serial_port
Command: show serial_port
Baud Rate
Data Bits
Parity Bits
Stop Bits
Auto-Logout
local>
config serial_port
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure baud rate:
DES-3350SR Layer 3 Gigabit Switch
: 9600
: 8
: None
: 1
: 10 mins
Used to configure the serial port.
config serial_port {baud_rate [9600 | 19200 | 38400 | 115200] |
auto_logout [never | 2_minutes | 5_minutes | 10_minutes |
15_minutes]}
This command is used to configure the serial port's baud rate and
auto logout settings.
baud_rate [9600 | 19200 | 38400 | 115200]
that will be used to communicate with the management host.
auto logout – This parameter will set the time that the switch will
wait before logging out automatically, if left idle. The choices that
accompany this parameter are:
§ never
No time limit on the length of time the console
can be open with no user input.
§ 2_minutes
there is no user input for 2 minutes.
§ 5_minutes
there is no user input for 5 minutes.
§ 10_minutes
there is no user input for 10 minutes.
§ 15_minutes
there is no user input for 15 minutes.
Only administrator-level users can issue this command.
17
The serial bit rate
The console will log out the current user if
The console will log out the current user if
The console will log out the current user if
The console will log out the current user if