D-Link DES-3350SR Reference Manual page 237

show ospf virtual_link
Syntax
Description
Parameters
Restrictions
Usage Example:
To display the current OSPF virtual interface configuration:
local>show ospf virtual_link
Transit
Area ID
--------------- ----------------------
10.0.0.0
Total Entries: 1
local>
DES-3350SR Layer 3 Gigabit Switch
show ospf virtual_link {<area_id> <neighbor_id>}
This command will display the current OSPF virtual interface
configuration.
<area_id> A 32-bit number in the form of an IP address
(xxx.xxx.xxx.xxx) that uniquely identifies the OSPF area in the
OSPF domain.
<neighbor_id> The OSPF router ID for the remote area. This is a
32-bit number in the form of an IP address (xxx.xxx.xxx.xxx) that
uniquely identifies the remote area's Area Border Router. This is
the router ID of the neighbor router.
None.
Virtual Hello
Neighbor Router Interval
------------ ----------- -------------------- ------------
20.0.0.0 10
Dead Authentication Link
Interval
60 None
233
Status
DOWN