D-Link DES-3350SR Reference Manual page 197

local>disable rip
Command: disable rip
Success.
local>
show rip
Purpose
Syntax
Description
Parameters
Restrictions
Example Usage:
To display RIP configuration:
local>show rip
Command: show rip
RIP Global State : Disabled
RIP Interface Settings
Interface
-------------
System
Total Entries : 1
local>
DES-3350SR Layer 3 Gigabit Switch
Used to display the RIP configuration and statistics for the switch.
show rip {ipif <ipif_name 12>}
This command will display the RIP configuration and statistics for
a given IP interface or for all IP interfaces.
ipif <ipif_name 12>
want to display the RIP configuration and settings. If this
parameter is not specified, the show rip command will display the
global RIP configuration for the switch.
None.
IP Address TX Mode
------------------ ----------
10.41.44.33/8 Disabled
The name of the IP interface for which you
RX Mode Authen-
tication
------------- ----------
Disabled Disabled Disabled
193
State
-----