D-Link DES-3350SR Reference Manual page 432

show bootp_relay
Purpose
Syntax
Description
Parameters
Restrictions
Example Usage:
To display bootp relay status:
local>show bootp_relay
Command: show bootp_relay
Bootp Relay Status
Bootp Hops Count Limit
Bootp Relay Time Threshold : 0
Interface
------------
System
Total Entries: 1
local>
DES-3350SR Layer 3 Gigabit Switch
local>disable bootp_relay
Command: disable bootp_relay
Success.
local>
Used to display the current BOOTP relay configuration.
show bootp_relay {ipif <ipif_name 12>}
This command will display the current BOOTP relay configuration
for the switch, or if an IP interface name is specified, the BOOTP
relay configuration for that IP interface.
<ipif_name 12>
to display the current BOOTP relay configuration.
None.
Server 1 Server 2
--------------- ---------------
10.48.74.122 10.23.12.34
The name of the IP interface for which you what
: Disabled
: 4
Server 3 Server 4
---------------
10.12.34.12 10.48.75.121
184
--------------