D-Link DES-3350SR Reference Manual page 335

show 802.1p user_priority
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To show 802.1p user priority:
local> show 802.1p user_priority
Command: show 802.1p user_priority
QOS Class of Traffic
Priority-0 -> <Class-1>
Priority-1 -> <Class-0>
Priority-2 -> <Class-0>
Priority-3 -> <Class-1>
Priority-4 -> <Class-2>
Priority-5 -> <Class-2>
Priority-6 -> <Class-3>
Priority-7 -> <Class-3>
local>
config 802.1p default_priority
Purpose
Syntax
Description
DES-3350SR Layer 3 Gigabit Switch
Used to display the current 802.1p user priority tags to hardware
priority queue mapping in use by the switch.
show 802.1p user_priority
The show 802.1p user_priority command will display the current
802.1p user priority tags to hardware priority queue mapping in use
by the switch.
None.
None.
Used to specify default priority settings on the switch. Untagged
packets that are received by the switch will be assigned a priority
tag in its priority field using this command.
config 802.1p default_priority [<portlist> | all] <priority 0-7>
The config 802.1p default_priority command allows you to
specify the 802.1p priority value an untagged, incoming packet will
be assigned before being forwarded to its destination.
87