D-Link DES-3350SR Reference Manual page 206

disable pim
Parameters
Restrictions
Usage Example:
To disable PIM on the switch:
local>disable pim
Command: disable pim
Success.
local>
show pim neighbor
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display PIM settings as configured on the switch:
DES-3350SR Layer 3 Gigabit Switch
None.
Only administrator-level users can use this command.
Used to display PIM neighbor router table entries.
show pim neighbor {ipif <ipif_name 12> | ipaddress
<network_address>}
This command will list current entries in the PIM neighbor table for a
specified IP interface or destination router IP address.
ipif <ipif_name 12> – The name of an IP interface for which you
want to view the PIM neighbor router table.
ipaddress <network_address>- The IP address and netmask of the
destination routing device for which you want to view the neighbor
router table. You can specify the IP address and netmask
information using the traditional format or the CIDR format. For
example, 10.1.2.3/255.255.0.0 or 10.2.3.4/16.
If no parameters are specified, all PIM neighbor router tables are
displayed.
None.
202