D-Link DES-3350SR Reference Manual page 150

config radius delete
Restrictions
Example usage:
To delete previously configured RADIUS server communication settings:
local>config radius delete 1
Command: config radius delete 1
Success.
local>
config radius
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure the RADIUS settings:
DES-3350SR Layer 3 Gigabit Switch
Only administrator-level users can issue this command.
Used to configure the switch's RADIUS settings.
config radius <server_index 1-3> {ipaddress <server_ip> | key
<passwd 32> | auth_port <udp_port_number 1-65535> |
acct_port <udp_port_number 1-65535>}
The config radius command is used to configure the switch's
RADIUS settings.
<server_index 1-3> Assigns a number to the current set of
RADIUS server settings. Up to 3 groups of RADIUS server
settings can be entered on the switch.
ipaddress <server_ip>
key Specifies that a password and encryption key will be used
between the switch and the RADIUS server.
§ <passwd 32>
RADIUS server and the switch. Up to 32 characters can be
used.
auth_port <udp_port_number>
authentication requests. The default is 1812.
acct_port <udp_port_number>
accounting requests. The default is 1813.
Only administrator-level users can issue this command.
146
The IP address of the RADIUS server.
The shared-secret key used by the
The UDP port number for
The UDP port number for