Network Management (Snmp) Commands - D-Link DGS-1100-16/ME Reference Manual

NETWORK MANAGEMENT (SNMP) COMMANDS

The Switch supports the Simple Network Management Protocol (SNMP) versions 1 and 2c. Users can
specify which version of the SNMP host wants to use to get the trap from the Switch. The following table
lists the security features of the three SNMP versions:
SNMP Version Authentication Method
v1 Community String
v2c Community String
The Network Management commands in the Command Line Interface (CLI) are listed (along with the
appropriate parameters) in the following table.
Command
create snmp community
delete snmp community
show snmp community
create snmp host
delete snmp host
show snmp host
enable snmp traps
disable snmp traps
show snmp traps
enable snmp
authenticate_traps
disable snmp
authenticate_traps
config snmp
system_location
config snmp
system_name
config snmp
system_contact
config snmp
linkup_traps
config snmp
linkdown_traps
DGS-1100/ME Metro Ethernet Managed Switch CLI Reference Guide
Parameter
<string 16> [read_only | read_write]
<string 16>
<ipaddr> [v1 | v2c] <string 16>
<ipaddr>
<string 16>
<string 32>
<string 32>
[enable | disable]
[enable | disable]
Description
Community String is used for authentication -
NoAuthNoPriv
Community String is used for authentication -
NoAuthNoPriv
37
9