D-Link DES-3350SR Reference Manual page 162

local> config traffic_segmentation 1-9 forward_list 10-12
Command: config traffic_segmentation 1-9 forward_list 1-12
Success.
local>
show traffic_segmentation
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the current traffic segmentation configuration on the switch.
DES-3350SR Layer 3 Gigabit Switch
Used to display the current traffic segmentation configuration on the
switch.
show traffic_segmentation <portlist>
The show traffic_segmentation command is used to display the
current traffic segmentation configuration on the switch.
<portlist> Specifies a port or range of ports for which the current
traffic segmentation configuration on the switch will be displayed.
The port lists for segmentation and the forward list must be on the
same switch.
158