D-Link DES-3350SR Reference Manual page 470

show ospf aggregation
Syntax
Description
Parameters
Restrictions
Usage Example
To display OSPF area aggregation settings:
local>show ospf aggregation
Command: show ospf aggregation
OSPF Area Aggregation Settings
Area ID
------------ ---------------------
10.1.1.1
10.1.1.1
Total Entries: 2
local>
show ospf lsdb
Purpose
Syntax
Description
Parameters
DES-3350SR Layer 3 Gigabit Switch
show ospf aggregation {<area_id>}
This command will display the current OSPF area aggregation
settings.
<area_id> Enter this parameter if you wish to view this table by a
specific OSPF area ID.
None.
Aggregated LSDB
Network Address Type
--------------
10.0.0.0/8 Summary
20.2.0.0/16 Summary
Used to display the OSPF Link State Database (LSDB).
show ospf lsdb {area_id <area_id> | advertise_router <ipaddr>
| type [rtrlink | netlink | summary | assummary | asextlink]}
This command will display the current OSPF Link State Database
(LSDB).
area_id <area_id>
(xxx.xxx.xxx.xxx) that uniquely identifies the OSPF area in the
OSPF domain.
advertise_router <ipaddr>
type [rtrlink | netlink | summary | assummary | asextlink]
of link.
Advertise
-------------
Enabled
Enabled
A 32-bit number in the form of an IP address
The router ID of the advertising router.
222
The type