D-Link DES-3350SR Reference Manual page 55

config snmp system_location
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure the switch location for "
local>config snmp system_location HQ 5F
Command: config snmp system_location HQ 5F
Success.
local>
config snmp system_name
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure the switch name for "DES-3350SR Stackable Switch
local>config snmp system_name DES-3350SR Stackable Switch
Command: config snmp system_name DES-3350SR Stackable Switch
Success.
local>
DES-3350SR Layer 3 Gigabit Switch
Used to enter a description of the location of the switch.
config snmp system_location <sw_location>
The config snmp system_location command is used to enter a
description of the location of the switch. A maximum of 255
characters can be used.
<sw_location> - A maximum of 255 characters is allowed. A NULL
string is accepted if there is no location desired.
Only administrator-level users can issue this command.
":
HQ 5F
Used to configure the name for the switch.
config snmp system_name <sw_name>
The config snmp system_name command configures the name
of the switch.
<sw_name> - A maximum of 255 characters is allowed. A NULL
string is accepted if no name is desired.
Only administrator-level users can issue this command.
51
" :