show scheduling
Purpose
Syntax
Description
Parameters
Restrictions
Example Usage:
To show the scheduling:
local>show scheduling
Command: show scheduling
QOS Output Scheduling
Class-0
Class-1
Class-2
Class-3
local>
config scheduling
Purpose
Syntax
Description
Parameters
Restrictions
Example Usage:
DES-3350SR Layer 3 Gigabit Switch
Used to display the current traffic scheduling mechanisms in use
on the switch.
show scheduling
This command will display the current traffic scheduling
mechanisms in use on the switch.
None.
None.
MAX. Packets MAX. Latency
-------------
-------------
0
0
0
0
0
0
0
0
Used to configure QOS output scheduling.
config scheduling <class_id 0-3> { max_packet <value 0-255>
| max_latency <value 0-255> }
This command will config QOS output scheduling in use on the
switch.
None.
None.
90