D-Link DES-3350SR Reference Manual page 289

create snmp group
Parameters
Restrictions
Example usage:
DES-3350SR Layer 3 Gigabit Switch
<groupname 32> An alphanumeric name of up to 32 characters
that will identify the SNMP group the new SNMP user will be
associated with.
v1 – Specifies that SNMP version 1 will be used. The Simple
Network Management Protocol (SNMP), version 1, is a network
management protocol that provides a means to monitor and
control network devices.
v2c – Specifies that SNMP version 2c will be used. The SNMP v2c
supports both centralized and distributed network management
strategies. It includes improvements in the Structure of
Management Information (SMI) and adds some security features.
v3 – Specifies that the SNMP version 3 will be used. SNMP v3
provides secure access to devices through a combination of
authentication and encrypting packets over the network. SNMP v3
adds:
§ Message integrity
tampered with during transit.
§ Authentication
a valid source.
§ Encryption
Scrambles the contents of messages to
prevent it being viewed by an unauthorized source.
noauth_nopriv Specifies that there will be no authorization and
no encryption of packets sent between the switch and a remote
SNMP manager.
auth_nopriv Specifies that authorization will be required, but
there will be no encryption of packets sent between the switch and
a remote SNMP manager.
auth_priv Specifies that authorization will be required, and that
packets sent between the switch and a remote SNMP manger will
be encrypted.
read_view – Specifies that the SNMP group being created can
request SNMP messages.
write_view – Specifies that the SNMP group being created has
write privileges.
<view_name 32> An alphanumeric string of up to 32 characters
that is used to identify the group of MIB objects that a remote
SNMP manager is allowed to access on the switch.
notify_view Specifies that the SNMP group being created can
receive SNMP trap messages generated by the switch's SNMP
agent.
Only administrator-level users can issue this command.
41
Ensures that packets have not been
Determines if an SNMP message is from