D-Link DES-3350SR Reference Manual page 471

show ospf lsdb
Restrictions
Usage Example:
To display the link state database of OSPF:
local>show ospf lsdb
Command: show ospf lsdb
Area
ID
-----------
0.0.0.0
0.0.0.0
1.0.0.0
1.0.0.0
1.0.0.0
*
Total Entries: 5
local>
show ospf neighbor
Purpose
Syntax
Description
Parameters
Restrictions
Usage Example
To display the current OSPF neighbor router table:
DES-3350SR Layer 3 Gigabit Switch
None.
NOTE: When this command displays a "
LSDB table for the area_id or the Cost, this is interpreted as "no area ID"
for external LSAs, and as "no cost given" for the advertised link.
LSDB Advertising
Type Router ID
-------------- ------------------ ------------------ -------
RTRLink 50.48.75.73
Summary 50.48.75.73
RTRLink 50.48.75.73
Summary 50.48.75.73
Summary 50.48.75.73
ASExtLink 50.48.75.73
Used to display the current OSPF neighbor router table.
show ospf neighbor {<ipaddr>}
This command will display the current OSPF neighbor router table.
<ipaddr> The IP address of the neighbor router.
None.
*
" (a star symbol) in the OSPF
Link State Cost
ID
50.48.75.73 *
10.0.0.0/8 1
50.48.75.73 *
40.0.0.0/8 1
50.0.0.0/8 1
1.2.0.0/16 20
223
Sequence
Number
-----------------
0x80000002
0x80000001
0x80000001
0x80000001
0x80000001
0x80000001