D-Link DES-3350SR Reference Manual page 392

config 802.1x reauth ports
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure 802.1x reauthentication for ports 1-10:
local>config 802.1x reauth port_based ports 1-8
Command: config 802.1x reauth port_based ports 1-8
Success.
local>
config radius add
Purpose
Syntax
DES-3350SR Layer 3 Gigabit Switch
Used to configure the 802.1x re-authentication feature of the
switch.
config 802.1x reauth [port_based ports [<portlist | all>] |
mac_based [ports] [<portlist> | all] {mac_address
<macaddr>}]
The config 802.1x reauth command is used to re-authenticate a
previously authenticated device based on port number or MAC
address.
port_based – This instructs the switch to re-authorize 802.1x
function based only on the port number. Ports approved for re-
authorization can then be specified.
§ ports <portlist>
§ all
Specifies all of the ports on the switch.
mac-based - This instructs the switch to re-authorize 802.1x
function based on a specific MAC address. Ports approved for re-
authorization can then be specified.
§ <portlist>
Specifies a port or range of ports.
§ all
Specifies all of the ports on the switch.
mac_address <macaddr> - Specifies the MAC address of the
client the user wishes to add.
Only administrator-level users can issue this command.
Used to add a new RADIUS server.
config radius add <server_index 1-3> <server_ip> key
<passwd 32> [default | {auth_port <udp_port_number 1-
65535> | acct_port <udp_port_number 1-65535>}]
144
Specifies a port or range of ports.