D-Link DES-3350SR Reference Manual page 159

config access_profile
Restrictions
Example usage:
To configure the access profile with the profile ID of 1 to filter frames that have IP add resses in the range between
10.42.73.0 to 10.42.73.255:
local> config access_profile profile_id 2 add access_id 1 ip source_ip
10.42.73.1 deny
Command: config access_profile profile_id 1 add access_id 1 ip source_ip
10.42.73.1 deny
Success.
local>
show access_profile
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display all of the currently configured access profiles on the switch:
DES-3350SR Layer 3 Gigabit Switch
Only administrator-level users can issue this command.
Used to display the currently configured access profiles on the
switch.
show access_profile {profile_id <value 1-255>}
The show access_profile command is used to display the
currently configured access profiles
profile_id <value 1-255> - Enter this parameter, along with the
appropriate value between 1 and 255, to view a specific access
profile.
Entering this command without a parameter will display all
access profiles currently set on the switch.
Only administrator-level users can issue this command.
155