D-Link DES-3350SR Reference Manual page 130

local>config igmp_snooping querier default query_interval 125 state
enable
Command: config igmp_snooping querier default query_interval 125
state enable
Success.
local>
enable igmp_snooping
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable IGMP snooping on the switch:
local>enable igmp_snooping
Command: enable igmp_snooping
Success.
local>
disable igmp_snooping
Purpose
Syntax
DES-3350SR Layer 3 Gigabit Switch
Used to enable IGMP snooping on the switch.
enable igmp_snooping {forward_mcrouter_only}
This command allows you to enable IGMP snooping on the
switch. If forward_mcrouter_only is specified, the switch will only
forward all multicast traffic to the multicast router, only.
Otherwise, the switch forwards all multicast traffic to any IP
router.
forward_mcrouter_only
forward all multicast traffic to a multicast-enabled router.
Otherwise, the switch will forward all multicast traffic to any IP
router.
Only administrator-level users can issue this command.
Used to enable IGMP snooping on the switch.
disable igmp_snooping {forward_mcrouter_only}
126
Specifies that the switch should only