D-Link DES-3350SR Reference Manual page 334

config 802.1p user_priority
Description
Parameters
Restrictions
Example usage:
To configure 802.1 user priority on the switch:
local> config 802.1p user_priority 1 3
Command: config 802.1p user_priority 1 3
Success.
local>
show 802.1p user_priority
DES-3350SR Layer 3 Gigabit Switch
The config 802.1p user_priority command is used to configure
the way the switch will map an incoming packet, based on its
802.1p user priority tag, to one of the eight hardware priority
queues available on the switch. The switch's default is to map the
incoming 802.1p priority values to the eight hardware priority
queues according to the following chart:
802.1p Switch Hardware
Value Priority Queue
--------- ------------------
0 1
1 0
2 0
3 1
4 2
5 2
6 3
7 3
<priority 0-7> Specifies which of the eight 802.1p priority tags (0
through 7) you want to map to one of the switch's hardware priority
queues (<class_id>, 0 through 3).
<class_id 0-3> Specifies which of the switch's hardware priority
queues the 802.1p priority tags (specified above) will be mapped
to.
Only administrator-level users can issue this command.
86