D-Link DES-3350SR Reference Manual page 191

Example Usage:
To enable cache lookup for DNS relay.
Example Usage:
To enable static table lookup for DNS relay.
disable dnsr
Purpose
Syntax
Description
Parameters
Restrictions
Example Usage:
To disable status of DNS relay.
DES-3350SR Layer 3 Gigabit Switch
local>enable dnsr
Command: enable dnsr
Success.
local>
local>enable dnsr cache
Command: enable dnsr cache
Success.
local>
local>enable dnsr static
Command: enable dnsr static
Success.
local>
Used to disable DNS relay on the switch.
disable dnsr {cache | static}
This command is used, in combination with the enable dnsr
command above, to enable and disable DNS Relay on the switch.
cache – This parameter will allow the user to disable the cache
lookup for the DNS rely on the switch.
static - This parameter will allow the user to disable the static table
lookup for the DNS rely on the switch.
Only administrator-level users can issue this command.
187