D-Link DES-3350SR Reference Manual page 400

create access_profile
Restrictions
Example usage:
To create an access profile that will deny service to the subnet ranging from 10.42.73.0 to 10.42.73.255:
local>create access_profile ip vlan source_ip_mask 20.0.0.0
destination_ip_mask 10.0.0.0 dscp icmp type code permit profile_id 101
Command: create access_profile ip vlan source_ip_mask 20.0.0.0
destination_ip_mask 10.0.0.0 dscp icmp type code permit profile_id 101
Success.
DES-3350SR
delete access_profile
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To delete the access profile with a profile ID of 1:
local> delete access_profile profile_id 1
Command: delete access_profile profile_id 1
Success.
local>
config access_profile
DES-3350SR Layer 3 Gigabit Switch
Only administrator-level users can issue this command.
Used to delete a previously created access profile.
delete access_profile [profile_id <value 1-255>]
The delete access_profile command is used to delete a previously
created access profile on the switch.
profile_id <value 1-255>
is used to identify the access profile that will be deleted with this
command. This value is assigned to the access profile when it is
created with the create access_profile command.
Only administrator-level users can issue this command.
152
Enter an integer between 1 and 255 that