D-Link DES-3350SR Reference Manual page 117

local>show address_binding ip_mac ipaddress 10.1.1.8
mac_address 00-00-00-00-00-12
Command: show address_binding ip_mac ipaddress
10.1.1.8 mac_address 00-00-00-00-00-12
Enabled ports: 2
IP Address
---------------
10.1.1.8
Total entries : 1
local>
Delete address_binding
Purpose
Syntax
Description
Parameters
Restrictions
DES-3350SR Layer 3 Gigabit Switch
MAC Address
-----------------
00-00-00-00-00-12
Used to delete IP-MAC Binding entries.
[ip_mac [ipaddress <ipaddr> {mac_address <macaddr>} |all]
|blocked [all| vlan_name <vlan_name> mac_address
<macaddr>]]
This command will delete IP-MAC Binding entries. Two different
kinds of information can be deleted.
IP_MAC – Individual Address Binding enties can be deleted
by entering the physical and IP addresses of the device.
Toggleing to all will delete all the Address Binding entries.
Blocked – Blocked address binding entries (bindings
between VLAN names and MAC addresses) can be
deleted by entering the VLAN name and the physical
address of the device. To delete all the Blocked Address
Binding entries, toggle all.
<ipaddr> The IP address of the device where the IP-MAC binding
is made.
<macaddr> The MAC address of the device where the IP-MAC
binding is made.
<vlan_name> The VLAN name of the VLAN that is bound to a
MAC address in order to block a specific device on a known VLAN.
all – For IP_MAC binding all specifies all the IP-MAC binding
entries; for Blocked Address Binding entries all specifies all the
blocked VLANs and their bound phsical addresses.
Only administrator-level users can issue this command.
113