Command Syntax - D-Link DES-3350SR Reference Manual

The following symbols are used to describe how command entries are made and values and arguments are specified in this
manual. The online help contained in the CLI and available through the console interface uses the same syntax.
Purpose
Syntax
Description
Example Command
Purpose
Syntax
Description
Example Command
Purpose
Syntax
Description
Example Command
DES-3350SR Layer 3 Gigabit Switch
Note: All commands are case-sensitive. Be sure to disable Caps Lock or
any other unwanted function that changes text case.
<angle brackets>
Encloses a variable or value that must be specified.
create ipif <ipif_name> vlan <vlan_name 32> ipaddress
<network_address>
In the above syntax example, you must supply an IP interface
name in the <ipif_name> space, a VLAN name in the
<vlan_name 32> space, and the network address in the
<network_address> space. Do not type the angle brackets.
create ipif Engineering vlan Design ipaddress
10.24.22.5/255.0.0.0
[square brackets]
Encloses a required value or set of required arguments. One
value or argument can be specified.
create account [admin | user]
In the above syntax example, you must specify either an admin
or a user level account to be created. Do not type the square
brackets.
create account admin
| vertical bar
Separates two or more mutually exclusive items in a list, one of
which must be entered.
show snmp [community | detail]
In the above syntax example, you must specify either
community, or detail. Do not type the backslash.
show snmp community
{braces}
C
9
3
S
OMMAND YNTAX