D-Link DES-3350SR Reference Manual page 128

config igmp_snooping
Parameters
Restrictions
Example usage:
To configure the igmp snooping:
local>config igmp_snooping default host_timeout 250 state enable
Command: config igmp_snooping default host_timeout 250 state enable
Success.
local>
config igmp_snooping querier
Purpose
Syntax
Description
DES-3350SR Layer 3 Gigabit Switch
<vlan_name 32> The name of the VLAN for which IGMP
snooping is to be configured.
all – Selecting this parameter will configure IGMP snooping for all
VLANs on the switch.
host_timeout <sec 1-16711450>
amount of time a host can be a member of a multicast group
without the switch receiving a host membership report. The
default is 260 seconds.
router_timeout <sec 1-16711450>
amount of time a route can be a member of a multicast group
without the switch receiving a host membership report. The
default is 260 seconds.
leave_timer <sec 1-16711450>
seconds.
state [enable | disable]
snooping for the specified VLAN.
Only administrator-level users can issue this command.
This command configures IGMP snooping querier.
config igmp_snooping querier [<vlan_name 32> | all]
{query_interval <sec 1-65535> | max_response_time <sec 1-
25> | robustness_variable <value 1-255> |
last_member_query_interval <sec 1-25> | state [enable |
disable]
Used to configure the time in seconds between general query
transmissions, the maximum time in seconds to wait for reports
from members and the permitted packet loss that guarantees
IGMP snooping.
124
Specifies the maximum
Specifies the maximum
Leave timer. The default is 2
Allows you to enable or disable IGMP