Show Debounce Times In An Interface; Disable Ports When One Only Sfm Is Available (E300 Only); Disable Port On One Sfm - Dell Force10 S4810P Configuration Manual

Show debounce times in an interface

show interface debounce
FTOS#
FTOS#show interfaces debounce gigabitethernet 3/1
Interface
GigabitEthernet 3/1
FTOS#
Note: FTOS rounds the entered debounce time up to the nearest hundredth.
Note in the example in
appears as 200 in the example in

Disable ports when one only SFM is available (E300 only)

Selected ports can be shut down when a single SFM is available on the E300 system. Each port to be shut
down must be configured individually.
When an E300 system boots up and a single SFM is active this configuration, any ports configured with
this feature will be shut down. All other ports are booted up.
Similarly, if an SFM fails (or is removed) in an E300 system with two SFM, ports configured with this
feature will be shut down. All other ports are treated normally.
When a second SFM is installed or replaced, all ports are booted up and treated as normally. This feature
does not take affect until a single SFM is active in the E300 system.

Disable port on one SFM

This feature must be configured for each interface to shut down in the event that an SFM is disabled. Enter
the command
available.
502
| Interfaces
[ type ] [ slot/port ] EXEC Privilege
Time(ms)
200
Assign a debounce time to an interface
Show debounce times in an interface
from INTERFACE mode to disable the port when only a single SFM is
disable-on-sfm-failure
Show the debounce time for the specified interface.
Enter the interface type keyword followed by the type
of interface and slot/port information:
• For a 10/100/1000 Ethernet interface, enter the
keyword GigabitEthernet followed by the slot/
port information.
• For a Gigabit Ethernet interface, enter the keyword
GigabitEthernet followed by the slot/port
information.
• For a 10 Gigabit Ethernet interface, enter the
keyword TenGigabitEthernet followed by the
slot/port information.
that the timer was set at 150 ms, but
above.