Dell Force10 S4810P Configuration Manual page 237

High-density, 1ru 48-port 10gbe switch
Hide thumbs Also See for Force10 S4810P:
Table of Contents

Advertisement

Route map continue
The BGP route map
entry to a specific route-map entry (the
continue feature moves to the next sequence number (also known as an implied continue). If a match
clause exists, the
matches,
continue
continue [ sequence-number ]
Match Clause with a Continue Clause
The
feature can exist without a match clause. Without a match clause, the continue clause
continue
executes and jumps to the specified route-map entry. With a match clause and a continue clause, the match
clause executes first and the continue clause next in a specified route map entry. The continue clause
launches only after a successful match. The behavior is:
A successful match with a continue clause—the route map executes the set clauses and then goes to the
specified route map entry upon execution of the continue clause.
If the next route map entry contains a continue clause, the route map executes the continue clause if a
successful match occurs.
If the next route map entry does not contain a continue clause, the route map evaluates normally. If a
match does not occur, the route map does not continue and falls-through to the next sequence number,
if one exists.
Set Clause with a Continue Clause
If the route-map entry contains sets with the continue clause, then the set actions operation is performed
first followed by the continue clause jump to the specified route map entry.
If a set actions operation occurs in the first route map entry and then the same set action occurs with a
different value in a subsequent route map entry, the last set of actions overrides the previous set of
actions with the same
If the
set community additive
and AS numbers are prepended.
feature (in ROUTE-MAP mode) allows movement from one route-map
continue
sequence number
feature executes only after a successful match occurs. If there are no successful
continue
is ignored.
command.
set
and
set as-path prepend
). If the sequence number is not specified, the
commands are configured, the communities
Border Gateway Protocol | 237

Advertisement

Table of Contents
loading

Table of Contents