Dell Force10 S4810P Configuration Manual page 592

IPv6 routes
Use any of the these commands in ROUTER ISIS ADDRESS-FAMILY IPV6 mode to add routes from
other routing instances or protocols.
These commands apply to IPv6 IS-IS only. Use the
Note:
prefix lists to IPv4 routes.
Command Syntax
{
redistribute bgp as-number
} [
static level-1 level-1-2 | level-2] [metric
] [
metric-type {external | internal
metric-value
[
route-map map-name
redistribute ospf process-id [level-1| level-1-2 |
level-2] [metric value
] [
internal metric-type {external | interna
[
route-map map-name
Use the
show running-config isis
(including both IPv4 and IPv6 settings), or the
current IPv4 IS-IS configuration, or the
IPV6 mode to view the current IPv6 IS-IS configuration
Configure authentication passwords
You can assign an authentication password for routers in Level 1 and for routers in Level 2. Since Level 1
and Level 2 routers do not communicate with each other, you can assign different passwords for Level 1
routers and for Level 2 routers. If you want the routers in the level to communicate with each other , though,
they must be configured with the same password.
592
| Intermediate System to Intermediate System
|
connected | rip |
}]
]
] [
match external {1 | 2} | match
l }]
]
command in EXEC Privilege mode to view IS-IS configuration globally
ROUTER ISIS
Command Mode
ROUTER ISIS
ROUTER ISIS
command in ROUTER ISIS mode to view the
show config
command in ROUTER ISIS-ADDRESS FAMILY
show config
mode previously shown to apply
Purpose
Include BGP, directly connected, RIP, or
user-configured (static) routes in IS-IS.
Configure the following parameters:
• , , or
level-1 level-1-2 level-2
all redistributed routes to a level.
Default is .
level-2
• range: 0 to 16777215. Default is
metric
0.
• : choose either
metric-type
. Default is internal.
internal
• : name of a configured route
map-name
map.
Include specific OSPF routes in IS-IS.
Configure the following parameters:
• range: 1 to 65535
process-id
• , , or
level-1 level-1-2 level-2
all redistributed routes to a level.
Default is .
level-2
• range: 0 to 16777215. Default is
metric
0.
• range: 1 or 2
match external
•
match internal
• : external or internal.
metric-type
• : name of a configured route
map-name
map.
: Assign
or
external
: Assign