Private Vlan Configuration Example - Dell Force10 S4810P Configuration Manual

High-density, 1ru 48-port 10gbe switch

Hide thumbs Also See for Force10 S4810P:

Table of Contents

Figure 37-2. Configuring VLANs for a Private VLAN

FTOS(conf)# interface vlan 10

FTOS(conf-vlan-10)# private-vlan mode primary

FTOS(conf-vlan-10)# private-vlan mapping secondary-vlan 100-101

FTOS(conf-vlan-10)# untagged Gi 2/1

FTOS(conf-vlan-10)# tagged Gi 2/3

FTOS(conf)# interface vlan 101

FTOS(conf-vlan-101)# private-vlan mode community

FTOS(conf-vlan-101)# untagged Gi 2/10

FTOS(conf)# interface vlan 100

FTOS(conf-vlan-100)# private-vlan mode isolated

FTOS(conf-vlan-100)# untagged Gi 2/2

Private VLAN Configuration Example

Figure 37-3. Sample Private VLAN Topology

The following configuration is based on the example diagram, above:

Gi 0/0 and Gi 23 are configured as promiscuous ports, assigned to the primary VLAN, VLAN 4000.

Gi 0/25 is configured as a PVLAN trunk port, also assigned to the primary VLAN 4000.

Gi 0/24 and Gi 0/47 are configured as host ports and assigned to the isolated VLAN, VLAN 4003.

Gi 4/0 and Gi 23 are configured as host ports and assigned to the community VLAN, VLAN 4001.

Gi 4/24 and Gi 4/47 are configured as host ports and assigned to community VLAN 4002.

Private VLANs (PVLAN) | 801