Dell Force10 S4810P Configuration Manual page 270

The following line indicates the successful completion of the auto-execution script.
00:00:49: %STKUNIT1-M:CP %JUMPSTART-5-AUTOEXEC_SUCCESS:
The AutoExec Script execution returned Success.
The following line indicates that the Configuration file is loaded into the switch.
FTOS#00:00:51: %STKUNIT1-M:CP %SYS-5-CONFIG_LOAD: Loading configuration file
00:00:52: %STKUNIT1-M:CP %IFMGR-5-ASTATE_UP: Changed interface Admin state to up: Te 0/36
00:00:53: %STKUNIT1-M:CP %IFMGR-5-ASTATE_DN: Changed interface Admin state to down: Ma 0/0
| Bare Metal Provisioning 3.0 (BMP 3.0)
270