Dell Force10 S4810P Configuration Manual page 189

ASDOT+ representation splits the full binary 4-byte AS number into two words of 16 bits separated by a
decimal point (.): <high-order 16 bit value>.<low-order 16 bit value>. Some examples are shown in
Table 9-2.
• All AS Numbers between 0-65535 are represented as a decimal number, when entered in the CLI as
well as when displayed in the show command outputs.
• AS Numbers larger than 65535 is represented using ASDOT notation as <higher 2 bytes in
decimal>.<lower 2 bytes in decimal>. For example: AS 65546 is represented as 1.10.
ASDOT representation combines the ASPLAIN and ASDOT+ representations. AS Numbers less than
65536 appear in integer format (asplain); AS Numbers equal to or greater than 65536 appear using the
decimal method (asdot+). For example, the AS Number 65526 appears as 65526, and the AS Number
65546 appears as 1.10.
Dynamic AS Number Notation application
FTOS 8.3.1.0 applies the ASN Notation type change dynamically to the running-config statements. When
you apply or change an asnotation, the type selected is reflected immediately in the running-configuration
and the show commands (Figure 9-9 and Figure 9-10).
Border Gateway Protocol | 189