Read Managed Object Values - Dell Force10 S4810P Configuration Manual

High-density, 1ru 48-port 10gbe switch
Hide thumbs Also See for Force10 S4810P:
Table of Contents

Advertisement

Read Managed Object Values

You may only retrieve (read) managed object values if your management station is a member of the same
community as the SNMP agent.
Dell Force10 supports RFC 4001,
representing a type of internet address. These values display for ipAddressTable objects using the
command.
snmpwalk
In the following figure, the value "4" displays in the OID before the IP address for IPv4. For an IPv6 IP
address ), a value of "16" displays.
>
snmpwalk -v 2c -c public 10.11.195.63 1.3.6.1.2.1.4.34
IP-MIB::ip.34.1.3.1.4.1.1.1.1 = INTEGER: 1107787778
IP-MIB::ip.34.1.3.1.4.2.1.1.1 = INTEGER: 1107787779
IP-MIB::ip.34.1.3.2.16.0.1.0.0.0.0.0.0.0.0.0.0.0.0.0.1 = INTEGER: 1107787778
IP-MIB::ip.34.1.3.2.16.0.2.0.0.0.0.0.0.0.0.0.0.0.0.0.1 = INTEGER: 1107787779
IP-MIB::ip.34.1.3.2.16.254.128.0.0.0.0.0.0.2.1.232.255.254.139.5.8 = INTEGER: 1107787778
IP-MIB::ip.34.1.4.1.4.1.1.1.1 = INTEGER: 1
IP-MIB::ip.34.1.4.1.4.2.1.1.1 = INTEGER: 1
IP-MIB::ip.34.1.4.2.16.0.1.0.0.0.0.0.0.0.0.0.0.0.0.0.1 = INTEGER: 1
There are several UNIX SNMP commands that read data:
Task
Read the value of a single managed object,
as shown in
Figure
46-3.
Figure 46-3. Reading the Value of a Managed Object
> snmpget -v 2c -c mycommunity 10.11.131.161 sysUpTime.0
DISMAN-EVENT-MIB::sysUpTimeInstance = Timeticks: (32852616) 3 days, 19:15:26.16
> snmpget -v 2c -c mycommunity 10.11.131.161 .1.3.6.1.2.1.1.3.0
Read the value of the managed object
directly below the specified object, as
shown in
Figure
46-4.
Figure 46-4. Reading the Value of the Next Managed Object in the MIB
> snmpgetnext -v 2c -c mycommunity 10.11.131.161 .1.3.6.1.2.1.1.3.0
SNMPv2-MIB::sysContact.0 = STRING:
> snmpgetnext -v 2c -c mycommunity 10.11.131.161 sysContact.0
Read the value of many objects at once, as
shown in
Figure
46-5.
Textual Conventions for Internet Work Addresses
Command
snmpget -v version -c community agent-ip {identifier.instance |
descriptor.instance}
snmpgetnext -v version -c community agent-ip {identifier.instance |
descriptor.instance}
snmpwalk -v version -c community agent-ip {identifier.instance |
descriptor.instance}
that defines values
Simple Network Management Protocol (SNMP) | 949

Advertisement

Table of Contents
loading

Table of Contents