Fip Snooping Configuration Example - Dell Force10 S4810P Configuration Manual

Table 18-5. show fip-snooping statistics Command Descriptions
Number of FDISC Rejects
Number of FLOGO Accepts
Number of FLOGO Rejects
Number of CVLs
Number of FCF Discovery
Timeouts
Number of VN Port Session
Timeouts
Number of Session failures due
to Hardware Config
Figure 18-9.
FTOS# show fip-snooping system
Global Mode
FCOE VLAN List (Operational)
FCFs
Enodes
Sessions
Figure 18-10.
FTOS# show fip-snooping vlan
* = Default VLAN
VLAN FC-MAP
---- ------
*1 -
100 0X0EFC00

FIP Snooping Configuration Example

Figure 18-11
(server blade) and an FCF (ToR switch). The ToR switch operates as an FCF and FCoE gateway.
418
| FIP Snooping
Field
Number of FIP FDISC reject frames received on the interface.
Number of FIP FLOGO accept frames received on the interface.
Number of FIP FLOGO reject frames received on the interface.
Number of FIP clear virtual link frames received on the interface.
Number of FCF discovery timeouts that occurred on the interface.
Number of VN port session timeouts that occurred on the interface.
Number of session failures due to hardware configuration that occurred on the
interface.
system Command Example
show fip-snooping
: Enabled
: 1, 100
: 1
: 2
: 17
show fip-snooping vlan
FCFs Enodes Sessions
---- ------ --------
- - -
1 2 17
shows a S4810 switch used as a FIP snooping bridge for FCoE traffic between an ENode
Description
Command Example