Sflow Show Commands; Show Sflow Globally; Show Sflow On An Interface - Dell Force10 S4810P Configuration Manual

sFlow Show Commands

FTOS includes the following sFlow display commands:
•

Show sFlow Globally

•

Show sFlow on an Interface

• Show sFlow on a Line Card
Show sFlow Globally
Use the following command to view sFlow statistics:
Command Syntax
show sflow
Figure 45-2
Figure 45-2. Command Example:
FTOS#show sflow
sFlow services are enabled
Global default sampling rate: 32768
Global default counter polling interval: 20
1 collectors configured
Collector IP addr: 133.33.33.53, Agent IP addr: 133.33.33.116, UDP port: 6343
77 UDP packets exported
0 UDP packets dropped
165 sFlow samples collected
69 sFlow samples dropped due to sub-sampling
Linecard 1 Port set 0 H/W sampling rate 8192
Gi 1/16: configured rate 8192, actual rate 8192, sub-sampling rate 1
Gi 1/17: configured rate 16384, actual rate 16384, sub-sampling rate 2
Show sFlow on an Interface
Use the following command to view sFlow information on a specific interface:
Command Syntax
show sflow interface
interface-name
Figure 45-3
938
| sFlow
Command Mode
EXEC
is a sample output from the
Command Mode
EXEC
is a sample output from the
Purpose
Display sFlow configuration information and statistics.
command:
show sflow
show sflow
Indicates sFlow is globally enabled
Indicates sFlow is enabled on
linecards Gi 1/16 and Gi 1/17
Purpose
Display sFlow configuration information and statistics on a
specific interface.
command.
show sflow interface