Dell Force10 S4810P Configuration Manual page 772

To display the IPsec security associations (SAs) used on OSPFv3 interfaces, enter the following command:
Command Syntax
show crypto ipsec sa ipv6
[ interface interface ]
772
| Open Shortest Path First (OSPFv2 and OSPFv3)
Command Mode Usage
EXEC Privilege Displays security associations set up for OSPFv3 links in IPsec
authentication and encryption policies on the router.
To display information on the SAs used on a specific interface,
enter
values:
For a 1-Gigabit Ethernet interface, enter
GigabitEthernet slot/port
For a Port Channel interface, enter
port-channel numbers (on an E-Series TeraScale):
1 to 255.
For a 10-Gigabit Ethernet interface, enter
slot/port.
For a VLAN interface, enter
Valid VLAN IDs: 1 to 4094
, where
interface interface
interface
.
vlan vlan-id
is one of the following
. Valid
port-channel number
TenGigabitEthernet
.