Add Tagged And Untagged Ports To A Vlan - Dell Force10 S4810P Configuration Manual
High-density, 1ru 48-port 10gbe switch
Hide thumbs
Also See for Force10 S4810P:
- Manual (60 pages) ,
- Quick start manual (27 pages) ,
- Reference manual (1637 pages)
Table of Contents
Advertisement
The value 40 is in the first set of 7 hex pairs, indicating that these ports are in Stack Unit 0. The hex value
40 is 0100 0000 in binary. As described above, the left-most position in the string represents Port 1. The
next position from the left represents Port 2 and has a value of 1, indicating that Port 0/2 is in VLAN 10.
The remaining positions are 0, so those ports are not in the VLAN.
Note that the table contains none of the other information provided by the command, such as port speed or
whether the ports are tagged or untagged.
Add Tagged and Untagged Ports to a VLAN
The value dot1qVlanStaticEgressPorts object is an array of all VLAN members.
The dot1qVlanStaticUntaggedPorts object is an array of only untagged VLAN members. All VLAN
members that are not in dot1qVlanStaticUntaggedPorts are tagged.
•
To add a tagged port to a VLAN, write the port to the dot1qVlanStaticEgressPorts object, as shown in
Figure
•
To add an untagged port to a VLAN, write the port to the dot1qVlanStaticEgressPorts and
dot1qVlanStaticUntaggedPorts objects, as shown in
Note: Whether adding a tagged or untagged port, you must specify values for both
dot1qVlanStaticEgressPorts and dot1qVlanStaticUntaggedPorts.
In
Figure
Figure 46-21. Adding Untagged Ports to a VLAN using SNMP
>snmpset -v2c -c mycommunity 10.11.131.185 .1.3.6.1.2.1.17.7.1.4.3.1.2.1107787786 x
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00"
.1.3.6.1.2.1.17.7.1.4.3.1.4.1107787786 x "40 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00"
SNMPv2-SMI::mib-2.17.7.1.4.3.1.2.1107787786 = Hex-STRING: 40 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00
SNMPv2-SMI::mib-2.17.7.1.4.3.1.4.1107787786 = Hex-STRING: 40 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00
964
|
Simple Network Management Protocol (SNMP)
46-21.
46-21, Port 0/2 is added as an untagged member of VLAN 10.
Figure
46-22.
"40
00
Advertisement
Table of Contents
Troubleshooting
