Dell Force10 S4810P Configuration Manual page 408

High-density, 1ru 48-port 10gbe switch

Hide thumbs Also See for Force10 S4810P:

Table of Contents

Port-based ACLs are applied on all three port modes: on ports directly connected to an FCF,

server-facing ENode ports, and bridge-to-bridge links.

Port-based ACLs take precedence over global ACLs.

FCoE-generated ACLs take precedence over user-configured ACLs. A user-configured ACL entry

cannot deny FCoE and FIP snooping frames.

switch operates as an FCF for FCoE traffic. Converged LAN and SAN traffic is transmitted between the

ToR switch and an S4810 switch. The switch operates as a lossless FIP snooping bridge to transparently

forward FCoE frames between the ENode servers and the FCF switch.

Figure 18-2. FIP Snooping on an S4810 Switch

FIP Snooping

shows a switch used as a FIP snooping bridge in a converged Ethernet network. The ToR

Troubleshooting