Maintenance End Points - Dell Force10 S4810P Configuration Manual

These roles define the relationships between all devices so that each device can monitor the layers under its
responsibility. Maintenance points drop all lower-level frames and forward all higher-level frames.
Customer Network

Maintenance End Points

A Maintenance End Point (MEP) is a logical entity that marks the end-point of a domain. There are two
types of MEPs defined in 802.1ag for an 802.1 bridge:
• Up-MEP: monitors the forwarding path internal to an bridge on the customer or provider edge; on
Dell Force10 systems the internal forwarding path is effectively the switch fabric and forwarding
engine.
• Down-MEP: monitors the forwarding path external another bridge.
Configure Up- MEPs on ingress ports, ports that send traffic towards the bridge relay. Configure
Down-MEPs on egress ports, ports that send traffic away from the bridge relay.
Service Provider Network
Ethernet Access
Operator Domain (5)
MEP
Customer Network
towards relay away from relay
Up-MEP
Down-MEP
MPLS Core
MIP
Service Provider Ethernet Access
Customer Network
MPLS Access
Operator Domain (5)
802.1ag | 75