Clear Peer Statistics - Dell Force10 S4810P Configuration Manual

Clear Peer Statistics

Task
Reset the TCP connection to the peer and clear all peer
statistics.
Figure 31-16. Clearing Peer Statistics
R3_E600(conf)#do show ip msdp peer
Peer Addr: 192.168.0.1
Local Addr: 192.168.0.3(639)
State: Established
Timers: KeepAlive
SourceActive packet count (in/out):
SAs learned from this peer: 0
SA Filtering:
Input (S,G) filter: myremotefilter
Output (S,G) filter: none
R3_E600(conf)#do clear ip msdp peer 192.168.0.1
R3_E600(conf)#do show ip msdp peer
Peer Addr: 192.168.0.1
Local Addr: 0.0.0.0(0)
State: Inactive
Timers: KeepAlive
SourceActive packet count (in/out):
SAs learned from this peer: 0
SA Filtering:
Input (S,G) filter: myremotefilter
Output (S,G) filter: none
Command Syntax
clear ip msdp peer peer-address
Connect Source: Lo 0
Up/Down Time: 00:04:26
30 sec, Hold time 75 sec
5/0
Connect Source: Lo 0
Up/Down Time: 00:00:04
30 sec, Hold time 75 sec
0/0
Command Mode
CONFIGURATION
Multicast Source Discovery Protocol (MSDP) | 681