Dell Force10 S4810P Configuration Manual page 957

Step Task
3 On the server, use the command
snmpset -v snmp-version -c community-name -m mib_path/f10-copy-config.mib force10system-ip-address
mib-object.index
• Every specified object must have an object value, which must be preceded by the keyword
ranges.
• must be unique to all previously executed
index
previously, a message like the one in
command again.
• Use as many MIB Objects in the command as required by the MIB Object descriptions in
the command. See
Note: You can use the entire OID rather than the object name. Use the form: OID.index i object-value, as shown in
Figure 57.
Message 2 snmpset Index Value Error
Error in packet.
Reason: notWritable (that object does not support modification)
Failed object: FTOS-COPY-CONFIG-MIB::copySrcFileType.101
Table 7 shows examples of using the command
that:
• the server OS is UNIX
• you are using SNMP version 2c
• the community name is public, and
• the file f10-copy-config.mib is in the current directory or in the snmpset tool path.
Note: In UNIX, enter the command
f10-copy-config.mib
snmpset tool path.
Note: Use the following options in the
-c: View the community, either public or private
-m: View the MIB files for the SNMP command
-r: Number of retries using the option
-t: View the timeout
-v: View the SNMP version (either 1, 2, 2d or 3)
Table 46-4. Copying Configuration Files via SNMP
Task
Copy the running-config to the startup-config using the following command from the UNIX machine:
as shown:
snmpset
{ | | }
i a s
object-value...
Message 3
Table 7 or examples.
snmpset
in the directory from which you are executing the
snmpset
Command Syntax
commands. If an index value has been used
snmpset
appears. In this case, increment the index value and enter the
to copy a configuration. These examples assume
snmpset
for help using this command. Place the file
command to view additional information:
Simple Network Management Protocol (SNMP) | 957
Command Mode
. See Table 6
i
Table 6 to complete
snmpset command or in the
for