Dell Force10 S4810P Configuration Manual page 504

View the link dampening configuration on an interface using the command
dampening information on all or specific dampened interfaces using the command
dampening
FTOS# show interfaces dampening
InterfaceStateFlapsPenaltyHalf-LifeReuseSuppressMax-Sup
Gi 0/0Up005750250020
Gi 0/1Up21200205001500300
Gi 0/2Down4850306002000120
View a dampening summary for the entire system using the command show interfaces dampening
summary from EXEC Privilege mode, as shown in the example below.
FTOS# show interfaces dampening summary
20 interfaces are configured with dampening. 3 interfaces are currently suppressed.
Following interfaces are currently suppressed:
Gi 0/2
Gi 3/1
Gi 4/2
FTOS#
Clear Dampening Counters
Clear dampening counters and accumulated penalties using the command
following example.
FTOS# clear dampening interface Gi 0/1
FTOS# show interfaces dampening GigabitEthernet0/0
InterfaceStateFlapsPenaltyHalf-LifeReuseSuppressMax-Sup
Gi 0/1Up00205001500300
Link Dampening Support for XML
View the output of the following show commands in XML by adding
command:
• show interfaces dampening
• show interfaces dampening summary
• show interfaces interface x/y
504
| Interfaces
from EXEC Privilege mode, as shown in the following example.
, or view
show config
show interfaces
, as shown in the
clear dampening
to the end of the
| display xml