Dell Force10 S4810P Configuration Manual page 984

Configure the first stack group on unit 1:
stack-unit 1 stack-group 13
Configure the stack groups on unit 2:
stack-unit 2 stack-group 14
stack-unit 2 stack-group 15
Configure the stack groups on unit 3:
stack-unit 3 stack-group 12
stack-unit 3 stack-group 13
Configure the stack groups on unit 4:
stack-unit 4 stack-group 13
stack-unit 4 stack-group 14
Configure the final stack-group on unit 1 to complete the stack.
stack-unit 1 stack-group 12
When the stack-group configuration is complete, the system will print a syslog for reload, as shown below .
FTOS#configure
FTOS(conf)#stack-unit 4 stack-group 13
FTOS(conf)#02:39:12: %STKUNIT4-M:CP %IFMGR-6-STACK_PORTS_ADDED: Ports Fo 4/52
stacking ports. Please save and reload for config to take effect
FTOS(conf)#stack-unit 4 stack-group 14
FTOS(conf)#02:39:15: %STKUNIT4-M:CP %IFMGR-6-STACK_PORTS_ADDED: Ports Fo 4/56
stacking ports. Please save and reload for config to take effect
FTOS(conf)#
FTOS#02:39:18: %STKUNIT4-M:CP %SYS-5-CONFIG_I: Configured from
Reload each unit in the stack. After the reload is complete, the four units will come up as a stack with unit
1 as the management unit, unit 2 as the standby unit, and the remaining units as stack-members as shown in
the following example. All units in the stack can be accessed from the management unit.
FTOS#show system brief
Stack MAC : 00:01:e8:8c:53:32
Reload Type : normal-reload [Next boot : normal-reload]
-- Stack Info
Unit UnitType
----------------------------------------------------------------------------
0 Member
1 Management
2 Standby
3 Member
4 Member
5 Member
6 Member
7 Member
8 Member
984
| Stacking
--
Status ReqTyp
not present
online S4810
online S4810
online S4810
online S4810
not present
not present
not present
not present
console
CurTyp Version
S4810 4810-8-3-12-1447
S4810 4810-8-3-12-1447
S4810 4810-8-3-12-1447
S4810 4810-8-3-12-1447
have been configured as
have been configured as
Ports
64
64
64
64