Dell Force10 S4810P Configuration Manual page 803

•
show vlan private-vlan mapping
output from the S50V, above, in
• Two commands revised to display PVLAN data are:
show
show arp
•
• See revised output in
show vlan:
Figure 37-4. show vlan private-vlan Example Output from C300
c300-1#show vlan private-vlan
Primary Secondary Type
------- --------- --------- ------ ------------------------------------------
4000 Primary
4001 Community Yes
4002 Community Yes
4003 Isolated
Figure 37-5. show vlan private-vlan Example Output from S50V
S50-1#show vlan private-vlan
Primary Secondary Type
------- --------- --------- ------ ------------------------------------------
4000 Primary
4001 Community Yes
4003 Isolated
Figure 37-6. show vlan private-vlan mapping Example Output from S50V
S50-1#show vlan private-vlan mapping
Private Vlan:
Primary : 4000
Isolated : 4003
Community : 4001
In the following screenshot, note the addition of the PVLAN codes – P, I, and C – in the left column:
Figure 37-7. show vlan Example Output from S50V
S50V#show vlan
Codes: * - Default VLAN, G - GVRP VLANs, P - Primary, C - Community, I - Isolated
Q: U - Untagged, T - Tagged
x - Dot1x untagged, X - Dot1x tagged
G - GVRP tagged, M - Vlan-stack
NUM Status
* 1 Inactive
100 Inactive
P 200 Inactive
I 201 Inactive
: Display the primary-secondary VLAN mapping. See the example
Figure 37-6.
Figure
Active Ports
Yes Gi 0/0,23,25
Gi 4/0,23
Gi 4/24,47
Yes Gi 0/24,47
Active Ports
Yes Gi 0/3,25
Gi 0/4-5
Yes Gi 0/6
Description
primary VLAN in PVLAN
isolated VLAN in VLAN 200
37-7.
Q Ports
T Gi 0/19-20
T Gi 0/21
PVLAN codes
Private VLANs (PVLAN) | 803